2MP IR-Cut Face Recognition Camera Module Night Vision Camera Module Ir-Cut Night Vision Camera Module
003-0606 is another type of day&night USB camera module support IR-Cut, for face recognition. Based on 1/2.7”AR0230 sensor, it's a 2MP, UVC compliant, 4pins USB 2.0 connetor web camera . The motorized (switchable) IR-CUT filter and infrared LED can be triggered by the photo resistor according to the light environment to be ON/OFF to block or pass the infrared light
Key Features of Hampo Night Vision Camera Module
Day/Night Vision: IR-CUT filter is a mechanical and motor drive component inside of camera. Camera built-in IR-CUT filter can provide true day/night video surveillance. It can provide day mode and night mode switching automatically. In night mode, the inside filter will remove, hence allowing unnatural lights (ie.,Infrared) enter into image sensor to enhance low illumination performance. In day mode, the inside filter will be inserted between lens and image sensor to filter unnatural lights enter into image sensor, therefore to provide true color reproduction crisp images.
High Frame Rates: 1920*1080P @30fps, perfect for face recognition etc. application.
WDR: The wide dynamic range is applied for viewing the image smoothly under the condition of severe light contrast, the WDR for this camera module up to 96DB.
Plug&Play: UVC-compliant, just connect the camera to PC computer, laptop, Android device with the USB cable without extra drivers to be installed. No longer be anxious about installing the driver! The native UVC drivers of Windows, Linux and Mac shall be compatible with this camera so that it does not require extra drivers to be installed.
Ir-Cut Night Vision Camera Module Applications:
- Security monitoring
- Home video surveillance system
- Day&night vision security camera system
- Underground parking
- Face recognition
- Access control system etc.
https://www.hampotech.com/products/2mp-ir-cut-face-recognition-camera-module.html
